SHOWTEC Octopod 30, Руководство пользователя

Страница: 7 / 13

5
Installation
Remove all packing materials from the Octopod 30 . Check that all foam and plastic padding is removed.
Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the Octopod fixtures using the supplied DC / Signal cables and set each fixture address as
illustrated below.
Fig. 3
Note : Link all cables before connecting electric power.
Ensure that the power supply is off before unplugging the Pixel Drive 30 or before
connecting / disconnecting fixtures.
Panel Functions
1) Mode
DMX Mode (1-255)
Select DMX address for the Pixel Drive 30.
Stand-alone Mode
1-8 = auto-chase
9 = sound-chase
Fixture Control Mode
Select Mode 1, 2, 4 or 8
Manual RGB Color Mixing