SHOWTEC Mistique, Руководство пользователя

Страница: 19 / 56

18
Ordercode: 60769
Mistique
Control Panel
A)
B)
C)
D)
E)
F)
G)
H)
I)
Status menu
Timer 2 button
Power OFF button
Manual button
Menu button
Heater button
Clean button
DMX button
Timer 1 button
Fig. 05
Control Mode
The fixtures are individually addressed on a data-link and connected to the controller.
The fixtures respond to the DMX signal from the controller. (When you select the DMX address and save it,
the controller will display the saved DMX address the next time.)
DMX Addressing
The control panel on the front side of the base allows you to assign the DMX fixture address, which is the
first channel from which the Mistique will respond to the controller.
Please note when you use the controller, the unit has a maximum of 5 channels.
When using multiple Mistiques, make sure you set the DMX addresses right.
Therefore, the DMX address of the first Mistique should be 1(001); the DMX address of the second Mistique
should be 1+5=6 (006); the DMX address of the third Mistique should be 6+5=11 (011), etc.
Please, be sure that you do not have any overlapping channels in order to control each Mistique
correctly.
If two or more Mistiques are addressed similarly, they will work similarly. For address settings, please refer to
the instructions under ”Addressing’.
Controlling:
After having addressed all Mistique fixtures, you may now start operating these via your lighting controller.
Note: After switching on, the Mistique will automatically detect whether DMX 512 data is received or not.
If there is no data received at the DMX input, the a red dot will be shown on the control panel.
The problem may be:
●
The XLR cable from the controller is not connected with the input of the Mistique.
● The controller is switched off or defective, the cable or connector is defective, or the signal wires are
swapped in the input connector.
Note: It is necessary to insert a XLR termination plug (with 120 Ohm) in the last fixture in order to ensure
proper transmission on the DMX data link.