SHOWTEC Mistique, Руководство пользователя

Страница: 15 / 56

14
Ordercode: 60769
Mistique
Start-up
01)
Put the Mistique Hazer on a flat surface and keep a minimum of 50 cm distance from any objects.
Make sure there is enough room to install all cables and CO
2
hoses.
02) Slowly fill in the liquid tank with the designated MHL-2 hazer fluid.
Note: It is strongly recommended to limit each refill to a maximum of 1 L of MHL-2 hazer fluid.
Note: Be careful not to exceed the maximum fluid level. DO NOT OVERFILL!
Note: You can only fill 75 % of the tank, due to compression (that is, not more than 2 L in the tank).
03) Connect the Machine "air-in" to the pressure regulator with gas tank and open the adjuster valve
between 50–60 psi (3,5-4,1 bar or 350–410 kPa) position.
04) Plug the power cord into a grounded electrical outlet. Set the power switch to ON.
05) You have to start the heater warm-up via the manual function or by DMX.
06) The device will now start to warm up and the display shows .
Warm-up is complete when the upper left corner of LCD control panel shows . The device
is now ready for operation.
07) Please go to the manual menu on the control panel and press Start to start hazing.
08) When you have finished hazing, press to activate the Power Off menu.
09) The next window will show: