SHOWTEC Marquees Uplighter RGB LED, Руководство по эксплуатации продукта

Страница: 7 / 12

5
Description of the device
Features
The Showtec Marquees Uplighter RGB LED is a LED effect with high output and great effects.
• Never change lamps again!
• Beam angle 25 º
• DMX-512 controlled
• Signal connector XLR 3-pole und 5-pole Male/ Female
• Master/Music/Manual
• Indoor use only
• 7x 1W RGB LEDs
• 1, 2, 3 or 7 DMX channel Mode
NOTE: Knowledge of DMX is required to fully utilize this unit.
Overview
Fig. 1
1)
LCD Display 6) 5-pin XLR DMX signal connector (IN)
2) Menu Buttons (MODE/UP/DOWN) 7) Fuse
3) 3-pin XLR signal connector (OUT) 8) CEE 16A 3-pole male
4) 3-pin XLR DMX signal connector (IN) 9) CEE 16A 3-pole female
5) 5-pin XLR DMX signal connector (OUT)
Installation
Remove all packing materials from the Marquees Uplighter RGB LED . Check that all foam and plastic
padding is removed. Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage.
Damages caused by non-observance are not subject to warranty.