SHOWTEC LED Studiobeam, Руководство пользователя

Страница: 8 / 12

6
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Damages caused by non-observance are not subject to warranty.
Control Modes
1. AUTO Mix Color Mode
When dipswitch #9 and #10 are turned on, the LED Studiobeam is in AUTO Mix Color Mode.
- Dipswitches #1 - #7 control the changing speed.
2. Sound Control Mode
When dipswitch #10 is turned on, the parcan will automatically change its color to the beat of the music.
With the Sensitivity control you can adjust its music-sensitivity.
3. Manual Mode
When the dipswitches #8, #9 and #10 are turned on, the LED Studiobeam is in Manual Mode.
- Dip Switches #1 and #2 control the brightness of the Red LEDs
- Dip Switches #3 and #4 control the brightness of the Green LEDs
- Dip Switches #5 and #6 control the brightness of the Blue LEDs
Brightness grades, Example RED :
00 (Dipswitch Setting: ) = 0%
01 (Dipswitch Setting: ) = 25%
10 (Dipswitch Setting: ) = 50%
11 (Dipswitch Setting: ) = 100%