SHOWTEC LED Studiobeam, Руководство пользователя

Страница: 9 / 12

7
4. DMX Mode
When all dipswitches are turned off, the LED Studiobeam is in DMX Mode.
- Dipswitches #1 - #9 control the DMX Addresses.
DMX products must have their own "address" to receive DMX signals.
Addresses on the controller are set
by flipping the appropriate DMX dipswitches.
You need to know that DMX address settings are the sum of the dip switch values.
A standard DMX address for a Showtec LED Studiobeam, which has 7 channels is as follow:
Example
LED StudioBeam Address Value DMX Dip Switches "ON"
Unit 5 29 #1, #3, #4, #5
Switch
Value
#1 1
#3 4
#4 8
#5 16 +
Total sum 29
Explanation: Since each unit has 7 channels, each address advances 7 values (See Address Value
above).
Once address values are determined, add DMX dipswitch values to obtain the appropriate address
(DMX Dip Switches "ON") for each unit. Flip appropriate DMX dipswitches on each unit.
DMX Channels