SHOWTEC LED Par 56 Short V2 42421-01, Руководство пользователя

Страница: 13 / 24

12
Ordercode: 42421-01
LED Par 56 Short
Example
Dipswitches #1 - #9 control the DMX Addresses.
DMX products must have their own "address" to receive DMX signals.
Addresses on the controller are set
by flipping the appropriate DMX dipswitches. You need to know that DMX address settings are the sum of
the dip switch values. A standard DMX address for a Showtec LED Par 56, which has 6 channels is as
follow:
LED Par 56
Address Value DMX Dip Switches "ON"
Unit 5 25 #1 , #4, #5
Switch Value
#1 1
#4 8
#5 16 +
Total sum 25
Explanation: Since each unit has 6 channels, each address advances 6 values (See Address Value
above).Once address values are determined, add DMX dipswitch values to obtain the appropriate
address (DMX Dip Switches "ON") for each unit. Flip appropriate DMX dipswitches on each unit.
Example:
01) If you want to give a LED par DMX address 133, you first have to find the number 133 in the DMX
Chart. (See page 13)
02) Then look at the left side (Dip Switches #1-#5) horizontally from 133.
In the Table you’ll see #1=ON, #2=OFF, #3=ON, #4=OFF, #5=OFF.
03) Finally look at the upper side of the table (Dip Switches #6-#9) vertically from 133.
In the Table you’ll see #6=OFF, #7=OFF, #8=ON, #9=OFF.