SHOWTEC LED Imagespot 75W, Руководство пользователя

Страница: 9 / 24

8
Ordercode: 40713
LED Imagespot 75W
Installation
Remove all packing materials from the LED Imagespot 75W. Check that all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power suppl y before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply.
Placing a gobo in the gobo compartment
Follow the steps below to place a gobo in the gobo compartment.
01)
Loosen the gobo compartment cover screw and remove the cover.
02) Take the gobo holder out of the device.
03)
Gently slide your gobo ( Not included!! ) into the gobo holder.
04)
Take the gobo holder and place it back into the gobo compartment.