SHOWTEC gatactic RGB-600 value series, Руководство пользователя

Страница: 13 / 32

12
Ordercode: 51325
Galactic RGB-600 Value line
Exclusion of liability
Be aware that in some countries, there are additional regulations, regarding the use of laser devices.
Therefore, we strongly advise you to verify your national laws with your authorities: We do not take any
responsibility for eventual discrepancies, changes or adaptions regarding lawful use of laser devices.
Control Modes
There are 4 modes:  Auto Program
 Sound-controlled
 Master/Slave
 DMX-512 (17CH)
One Galactic (Auto Program)
01)
Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) When the Galactic is not connected by a DMX-cable, it functions as a stand-alone device.
Please see page 18 for more information about the Auto built-in programs.
One Galactic (Sound-controlled)
01)
Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) When the Galactic is not connected with a DMX-cable, it functions as a stand-alone device.
Please see page 18 for more information about the Sound-controlled mode.