SHOWTEC GALACTIC BEAM G40 V1, Руководство пользователя

Страница: 12 / 28

11
Ordercode: 51315
Galactic Beam G40
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply. The device can be music-controlled by its built-in
microphone.
The Interlock plug/remote plug and safety keys are included in the box.
The interlock is the “included-in-the-box” successor for the optional remote interlock (51316)
They should be kept with the Galactic laser !!!
The following safety precautions should be followed:
●
The interlock plug should be placed on the backside ( 7 ) of your
Galactic laser.
● The keys should be put into the lock ( 4 ) of your Galactic laser.
Warning
Exclusion of liability
Be aware that in some countries, there are additional regulations, regarding the use of laser devices.
Therefore, we strongly advise you to verify your national laws with your authorities: We don’t take any
responsibility for eventual discrepancies, changes or adaptions regarding lawful use of laser devices.