SHOWTEC Explorer 1200, Руководство пользователя

Страница: 23 / 27

21
Replacing a Gobo from the Rotating Gobowheel
Gobo-wheel with rotating gobo’s
1. Disconnect mains power supply and set the switch to OFF.
2. Make sure that the gobo you want to insert has the same size.
Fig. 6
3. Gently bend out the gobo holder to release it from the fixative holes and eject it from the pressing snap.
4. P ress the ends of the spring gobo-lock together with a pair of pliers and remove it.
5. Remove the distance ring and gobo and insert the new gobo (glazy side towards the lamp) with distance
ring. Carefully put the spring gobo-lock back, gently press the spring gobo-lock a little bit together.
Possibly use a pair of pliers to press the spring gobo-lock a little bit together.
6. Click the gobo holder back into the gobowheel. Make sure that it slots into all 3 guiding slots.
Replacing a Gobo from the Colorwheel
1. Disconnect mains power supply and set the switch to OFF.
Fig. 7
2. Gently bend out the color filter to release it from the fixative holes and eject it from the pressing snap.
3. Put the new color filter back under the pressing snap. Make sure that it slots into all 3 guiding slots.