SHOWTEC EventLITE 7/4, Руководство пользователя

Страница: 11 / 32

10
Ordercode: 44005
EventLITE 7/4
Control Modes
There are 7 modes: Auto mode (stand alone)
Built-in programs (stand alone)
Sound mode (stand alone)
Static color mode (stand alone)
Master/Slave
DMX512
Wireless DMX (W-DMX)
One EventLITE (Auto mode)
When the EventLITE is not connected by a DMX-cable and Wireless DMX is switched off, it functions as a
stand-alone device. See page 17 for more information about the Auto mode.
One EventLITE (Built-in Programs)
When the EventLITE is not connected by a DMX-cable and Wireless DMX is switched off, it functions as a
stand-alone device. See page 17 for more information about the Built-in programs.
One EventLITE (Sound mode)
When the EventLITE is not connected by a DMX-cable and Wireless DMX is switched off, it functions as a
stand-alone device. See page 18 for more information about the Sound mode.
One EventLITE (Static color mode)
When the EventLITE is not connected by a DMX-cable and Wireless DMX is switched off, it functions as a
stand-alone device. See page 18 for more information about the Static mode.
Multiple EventLITEs (Master/Slave control)
01) Use a 3-p XLR cable to connect the EventLITE 7/4 and other devices.
The pins: 1. Earth
2. Signal (-)
3. Signal (+)
02)
Link the units as shown in (Fig. 04), connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second, third, and fourth unit. You can
use the same functions on the master device as described on pages 17 and 18 (Auto mode, Built-in
Programs, Sound mode or Static color mode). This means you can set your desired operation mode
on the master device and all slave devices will react the same as the master device.
Multiple EventLITEs ( Master/Slave control)
Fig. 04