SHOWTEC EVENTLITE 6/3, Руководство пользователя

Страница: 9 / 28

8
Ordercode: 44000
EventLITE 6/3 WDMX
Installation
Remove all packing materials from the EventLITE 6/3 WDMX . Check that all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Important
From software version V3.0 and newer, ”Lock” will appear on the display when the EventLITE 6/3 WDMX is
switched on.
The EventLITE 6/3 WDMX can be unlocked by pressing and holding the
MODE and DOWN button
simultaneously for 3 seconds.
Note: This function cannot be switched off
Sweden 2.4GHz Wireless communication module
Communication distance: depending on the transmitting power or transmitter module
Test conditions: W-DMX TRx Transmitter module, 2dBi Antenna, transmitting power
20dBm (100mW)
Range indoor: 60m (approx. through three concrete walls)
Range outdoor: 250m
Wireless DMX connection
The wireless receiving module “Pico G4 Receiver, 2.4GHz”, provided by Swedish WIRELESS SOLUTION, only
has a 2.4 GHz wireless signal receiving function. In order to match the wireless signal, please use the
Wireless DMX Micro Transmitter/ Black Box F-1 G4 MK2 by WIRELESS SOLUTION (
50231 ).
To control the status of the wireless communication, please look at the big green LED indicator light on
the right side of the display.
Wi-fi Problems:
01) No emitter/sender matching.
The LED Indicator dims for a long period of time.
02) Matching signal with one emitter, but loss of signal communication.
The LED Indicator light will light up for 100ms and then dim for 100ms; The LED will flicker quickly.
03) Communication with an emitter, but no DMX data.
The LED Indicator will light up for 900ms and then dim for 100ms; The LED will flicker slowly.
When the wireless DMX communication is normal, the LED indicator will always be on.
The EventLITE 6/3 WDMX cannot receive a wireless DMX signal and a DMX
cable signal at the same time
When the device is in static color mode, built-in program mode, auto-run mode or sound-active mode,
please ensure that the matching 2.4GHz wireless signal transmitter is OFF.