background image

 

  

 

 

   

 

Ordercode: 42595 

Compact Par 7 MKII 

Warning 

 

 

 

Unpacking Instructions 

Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure 
that all parts are present, and have been received in good condition. Notify the dealer immediately and 
retain packing material for inspection if any parts appear damaged from shipping or the carton itself 
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be 
returned to the factory, it is important that the fixture be returned in the original factory box and packing. 
 

Your shipment includes:  

 

Showtec Compact Par 7 MKII 

 

Schuko to IEC powercable 1,5m 

 

User manual 

 

 

 

LED Expected Lifespan 

LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the acceleration 
of this decline. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal or singular 
optimum conditions. For this reason when all color LEDs are used at their fullest intensity, life of the LEDs is 
significantly reduced. If improving your lifespan expectancy is of a higher priority, place care in providing 
for lower operational temperatures. This may include climatic-environmental and the reduction of overall 
projection intensity 
 

 

 

Safety Instructions 

Every person involved with the installation, operation and maintenance of this device has to: 

 

be qualified 

 

follow the instructions of this manual 

 

 

 
Before your initial start-up, please make sure that there is no damage caused by transportation. Should 
there be any, consult your dealer and do not use the device. 
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to 
follow the safety instructions and warning notes written in this manual. 
Please consider that damages caused by manual modifications to the device are not subject to 
warranty. 
This device contains no user-serviceable parts. Refer servicing to qualified technicians only. 
 

 

Содержание compact par 7 MKII

























Отзывы: