SHOWTEC Cameleon Spot 18-4 Q4, Руководство пользователя

Страница: 16 / 22

14
3. Auto Run Program
1) Press the MODE button on the device, until the display shows .
2) With this menu you can set Cameleon Spot to Auto Mode.
3) The device will play its built-in programs one after another, looping continuously.
4. Built-in Programs
1) Press the MODE button on the device, until the display shows .
2) With this menu you can set the Built-in Program Mode of the Cameleon Spot.
You can choose 10 built-in programs , by using the Up / Down buttons.
3) When you select , you can use a wide variety of manual color settings.
Press Setup to switch between the built-in programs Menu.
Red; Flash Frequency from 00-99
Red 80% - Green 20%; Flash Frequency from 00-99
Red 20% - Green 80%; Flash Frequency from 00-99
Green; Flash Frequency from 00-99
Green-Blue; Flash Frequency from 00-99
Blue; Flash Frequency from 00-99
Red 80% - Blue 20%; Flash Frequency from 00-99
Red 20% - Blue 80%; Flash Frequency from 00-99
White; Flash Frequency from 00-99
Red-White; Flash Frequency from 00-99
Green-White; Flash Frequency from 00-99
Blue-White; Flash Frequency from 00-99
RGBW Full ON; Flash Frequency from 00-99
Off; Flash Frequency from 00-99 has no function
4) When you select , you can press ENTER to switch between the built-in
programs Menu.
5) You can choose 2 different sub menus.
Program Running Speed from 01-99 and FL
Flash Frequency from 00-99
Use the SETUP button to scroll through the menu.
5. Slave Mode
When the display shows: , the device is a slave device. It will now react the same as its master.