SHOWTEC Cameleon Flood 7 RGB, Руководство пользователя

Страница: 16 / 20

14
5. DMX Mode
D button ( 9 ): First press the D -button, the LEDs will blink once.
S button ( 12 ): Press this button to start the DMX Address Setup.
The LEDs will blink three times.
Through these blinking color, the Cameleon indicates its current DMX address.
Use the buttons (0-9) to set the DMX address
Value Blink Color
0 White
1 Red
2 Orange
3 Light yellow
4 Green
5 Cyan
6 Blue
7 Purple
8 Pink
9 Yellow
For example, if you want to set DMX address 184.
1) Press the S button, the LEDs will blinks 3 times, meaning you can set the DMX address.
2) Press the 1 button, the LEDs will blink RED, meaning the 1 (hundreds) setting was successful.
3) Press the 8 button, the LEDs will blink PINK, meaning the 8 (tens) setting was successful.
4) Press the 4 button, the LEDs will blink GREEN, meaning the 4 (value 0-9) was successful.
All LEDs will flash three times to indicate the entered DMX address.
Note : the maximum operation time to enter one value (one digit) is 6 seconds
6. Static Color Mode
R (2), G (3), B (4): Press one of these buttons to activate manual color setting in combination with one of
the numeric buttons 0-9 to select a certain preset color. (see diagram below for colors)
Value Blink Color
0 White
1 Red
2 Orange
3 Light yellow
4 Green
5 Cyan
6 Blue
7 Purple
8 Pink
9 Yellow
7. Manual Color Mode
R (2), G (3), B (4): Press one of these buttons to activate manual color setting.
Use the + (13) and - (14) buttons to change the brightness
of the RGB LEDs. (brightness has 26 different grades).
Press the +/- buttons, do not hold down the buttons because this won’t function.
Example
: If you want to decrease the green value, press the G button. The LEDs will blink green once,
indicating that you have selected the green color. Now use the - button to decrease the value of green.
8. Factory Reset
To return to the factory default setting, press the BLACKOUT ( 1 ) + the numeric buttons 9, 8, 7.
First press the BLACKOUT button ( 1 ) to turn the light off. When the Cameleon is off (blackout), press the
numeric buttons in the sequence 9, 8, 7, to return to the factory default settings.