SHOWTEC Aura 4, Руководство по эксплуатации продукта

Страница: 8 / 13

6
Installation
Always disconnect from electric mains power supply before cleaning.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
One Aura 4
1. Fasten the effect light onto firm trussing (Use a 30-kg rated or stronger C-clamp fastened onto the
Aura 4 ). Leave at least 1 meter on all sides for air circulation.
2. Plug one end of the electric mains power cord into the IEC socket on the unit .
Then plug the other end of the cord into a proper electric power supply socket.
3. Use a 3-p XLR cable to connect the Aura 4 and other devices.
The pins:
1. Earth
2. Signal -
3.
Note : Link all cables and set all dip switches before connecting electric power
Multiple Aura 4
Fig. 4