background image

4

Rigging

Please follow the European and national guidelines concerning rigging, trussing and all other safety issues.

Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !

Procedure:

  If the Aura 4 is lowered from the ceiling or high joists, professional trussing systems have to be used.

  Use a clamp to mount the Aura 4, with the mounting-bracket, to the trussing system.

  The Aura 4 must never be fixed swinging freely in the room.

  The installation must always be secured with a safety attachment, e.g. an appropriate safety net or

safety-cable.

 

When rigging, derigging or servicing the Aura 4, always make sure, that the area below the
installation place is blocked and staying in the area is forbidden.

Improper installation can cause serious damage to people and property !

Connection with the mains

Connect the device to the mains with the power-plug.
Always pay attention, that the right color cable is connected to the right place.

 Cable

 Pin

 International

 BROWN

 FASE

 L

 BLUE

 NUL

 N

 YELLOW/GREEN  EARTH

Make sure that the device is always connected 

properly

 to the earth!

Содержание Aura 4














Отзывы: