SHOWTEC 51342, Руководство пользователя

Страница: 35 / 48

34
Galactic TXT
Product code: 51342
To play the countdown:
Press the ENTER key to enter countdown mode. The countdown is projected.
Press the PAUSE key or the SPACE bar to play the countdown.
●
To pause the countdown, press the PAUSE key or the SPACE bar.
● To resume the countdown, press the PAUSE key or the SPACE bar again.
● Press the MIRROR key repeatedly to flip the projection in 4 directions.
● Press the RGB key repeatedly to change the color of the projection. The following colors are possible:
red, green, yellow, blue, magenta, cyan and white.
DMX Mode
In this menu you can enable DMX control mode and set the set the DMX starting address of the device.
Press the ENTER key to enable DMX control mode. The display shows the current DMX starting
address. If there is no DMX connection, the display is blinking.
Note: If you exit DMX mode, the DMX connection will be discontinued and the device will not
react to the DMX controller.
Press the ENTER key to enable the DMX address adjustment.
Press the UP/DOWN ARROW keys to select the DMX starting address. The selection range is 001–492.
Press the ENTER key to confirm the selection.
Slave Mode
In this menu you can set the device as a slave device in master/slave control mode.
Press the ENTER key to set the device as a slave device.
System Settings
In this menu you can configure the show parameters and the device’s parameters.
Press the ENTER key to enable the configuration of the parameters.