27
Galactic TXT
Product code: 51342
Slave Mode
In this menu you can set the device as a slave device in master/slave control mode.
Press the ENTER button to set the device as a slave device.
System Settings
In this menu you can configure the show parameters and the device’s parameters.
Press the ENTER button to enable the configuration of the parameters.
Press the UP/DOWN buttons to select one of the parameters. There are 5 options available:
Set mirror, see 6.6.8.1. Set Mirror for more information
Set size, see 6.6.8.2. Set Size for more information
Master device. Select ON/OFF to enable/disable the device as a
master device in master/slave control mode
IR remote control. Select ON/OFF to enable/disable control with the
IR remote control
Reset to factory default settings
03)
Press the ENTER button to confirm the selection.
04)
Press the UP/DOWN buttons to scroll through the available settings.
05)
Press the ENTER button to set the parameter.
Set Mirror
In this submenu you can flip the projection in 4 directions.
Press the UP/DOWN buttons to select one of the following options:
Horizontal and vertical mirror effect
Vertical mirror effect
Содержание 51342
Страница 14: ...13 Galactic TXT Product code 51342 Dimensions Fig 05 Fig 06...
Страница 23: ...22 Galactic TXT Product code 51342 Menu Overview...
Страница 48: ...2020 Showtec...