15
Main Menu Options
1.
DMX address
2.
Master/Slave
3.
Remote Control
4.
Test
5.
Automatic
6.
Sensitivity
You can only change a certain setting when the display is blinking.
If you can’t change a certain value, please press the
Function
-button once and then change the value.
1. DMX Mode
With this menu you can set the DMX address.
1)
Press the
FUNC
button, until the display shows
.
2)
You can choose 512 different DMX addresses.
Use the Up / Down buttons to select the required address from
.
3)
Use the
ENTER
button to store your setting.
2. Slave Mode
With this menu you are able to set the device as a slave device.
1)
Press the
FUNC
button, until the display shows
.
2)
Use the
ENTER
button to store your setting.
3. Remote Mode
With this menu you are able to activate the remote control modus.
1)
Press the
FUNC
button, until the display shows .
2)
Use the
ENTER
button to store your setting.
3)
In any standalone mode (excepted REM and SLA), press ON/OFF for 2 seconds to activate the
remote function.
4)
Please see remote control menu for more info.
4. Run Test
1)
Press the
FUNC
button, until the display shows
.
2)
When you press
ENTER
, the device will start an internal test.
Содержание 51336
Страница 16: ...14 Menu Overview The Galactic GBC 120 will only show its version number at start up...
Страница 24: ......
