SHOWTEC 51336, Руководство по эксплуатации продукта

Страница: 12 / 24

10
Installation
Remove all packing materials from the Galactic GBC-120. Check that all foam and plastic padding is
removed. Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply. The device can be music-controlled by its built-in
microphone.
The Interlock plug/remote plug and safety keys are included in the box.
The interlock is the “included-in-the-box” successor for the optional remote interlock (51316)
They should be kept with the Galactic GBC-120 laser !!!
The following safety precautions should be followed:
-The interlock plug should be placed on the backside (
8 ) of your Galactic GBC-120 laser.
-The keys should be put into the lock ( 9 ) of your Galactic GBC-120 laser.
Warning
If the plug is not connected, your laser will not function.
If the key is not set to ON, your laser will not function.
Exclusion of liability
Be aware that in some countries, there are additional regulations, regarding the use of laser devices.
Therefore, we strongly advise you to check your national laws with the authorities: We don’t take any
responsibility for eventual discrepancies, changes or adaptions regarding lawful use of laser devices.