SHOWTEC 50348, Руководство пользователя

Страница: 8 / 12

7
Ordercode: 50348
Multi Exchanger
Backside
Fig. 02
15) 1-24 channel 25-pin 'D' connector OUT
16) 25-48 channel 25-pin 'D' connector OUT
17) 49-72 channel 25-pin 'D' connector OUT
18) Output level DIP switches
Flip the DIP switches to set the desired output level: 10V, 12V or 15V. See fig. 03 for more information.
19) Analog output polarity
Move the switch to the left for "+" output, or to the right for "-" output. See fig. 03 for more information.
20) Schuko power cable (1,2 m)
Fig. 03
Installation
Remove all packing materials from the Multi Exchanger. Check if all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.