SHOWTEC 50348, Руководство пользователя

Страница: 7 / 12

6
Ordercode: 50348
Multi Exchanger
Description of the device
Features
The Showtec Multi Exchanger converts a DMX-512 signal to a 72-channel analog output.
 Input voltage: 230V AC, 50Hz
 Analog output: +(-)10V, +(-)12V and +(-)15V
 Control: DMX mode, MIDI mode, HOLD mode
 Connections: 3 x 25-pin D OUT, 3-pin/5-pin DMX IN/OUT & MIDI IN/THRU
 Possibility to pre-store an emergency scene
 Memory backup with EEPROM
 CHASE function for channels 1-72 & speed control
 NOTE ON / OFF signal for MIDI
 Housing: Die-cast aluminum
 Fuse: F1L/250V
 Dimensions: 483 x 126 x 44 mm (LxWxH)
19 inch x 1HE
 Weight: 2,6 kg
Frontside
Fig. 01
01) Power switch ON/OFF
02) Fuse F1L/250V
03) LED display
04) UP button
Press the button to increase the DMX address/adjust options.
05) MENU button
Press the button to enter the DMX or MIDI mode and to confirm the settings.
06) DOWN button
Press the button to decrease the DMX address/adjust options.
07) CHASE button
Press to enter the CHASE mode. Then it is possible to set the chase speed between 01-99 and select
the desired channel between 01-72.
08) STORE button
Press the button to store a scene or to run a pre-stored scene.
09) MIDI IN connector
Use this connector to receive MIDI data.
10) MIDI THRU connector
Use this connector to repeat or send MIDI input.
11) 3-pin DMX signal connector IN
Use this connector to receive DMX signals.
12) 3-pin DMX OUT connector OUT
Use this connector to send DMX signals.
13) 5-pin DMX signal connector IN
Use this connector to receive DMX signals.
14) 5-pin DMX OUT connector OUT
Use this connector to send DMX signals.