SHOWTEC 40910, Руководство пользователя

Страница: 12 / 32

11
Ordercode: 40910
City Painter 9000 LED
Multiple City Painters 9000 LED (DMX Control)
01) Place the effect light on a flat surface. Leave at least 0,5 meter on all sides for air circulation.
02) Use a 3-pin XLR cable to connect the City Painters and other devices.
03) Link the units as shown in Fig. 03. Connect the first unit's DMX "out" socket with the second unit's "in"
socket, using a DMX-signal cable. Repeat this process to link the second, third, and fourth units.
04) Supply electric power: Plug electric mains power cords into each unit's IEC socket, then plug the
other end of the mains power cord into proper electric power supply sockets, starting with the first
unit. Do not supply power before the whole system is set up and connected properly.
Multiple City Painters 9000 LED DMX Set Up
Fig. 03
Note : Link all cables before connecting electric power