SHOWTEC 40910, Руководство пользователя

Страница: 10 / 32

9
Ordercode: 40910
City Painter 9000 LED
Overview
Fig. 01
01)
22 x 3W Red LEDs, 22 x 3W Green LEDs, 22 x 3W Blue LEDs, 12 x 3 W White (6000K) LEDs and 12 x 3W
Amber LEDs
02) Special 3-pin power cable IN IP-67
03) Special 3-pin DMX signal cable IN/OUT IP-67
04) 4-digit LED d menu buttons
Installation
Remove all packing materials from the City Painter 9000 LED. Check if all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply.
Control Modes
There are 4 modes:
• Static Colors
• Auto Mode
• Master/Slave
• DMX-512 (3CH, 4CH, 5CH, 6CH, 7CH, 11CH)