SHOWTEC 30978, Руководство пользователя

Страница: 9 / 18

9
ADDRESS Address code switch. The 10th code is switch code. If the 10th code is
OFF, the 1-9 codes are function code. If the 10th code is ON, the fixture can be
controlled by DMX512 signal and other codes are DMX address codes. If set the
address code of first light be 1, and then the second light will be 25 and so on.
1. Computer software control mode
Fixture, there has a switch to select control mode - by computer or inside
program:The fixture has ILDA DB 25 connector so that it can be controlled by
computer software. In the When ILDA DB25F IN connects with QM2000 interfacial
card or USB interfacial card, the lamp will be control by software which installed in
the computer. When ILDA DB25F IN connector's connection port are free, the laser
will driver by the inside program, temporality it can control by music or DMX512
signal.
The control mode switch will check the 4th Pin (InterLock A) and the 17th Pin (
InterLock B) to adjust whether there has computer (with interfacial card) be
connected to fixture. If Pin 4 not be connected to Pin 17, it means there no interfacial
card otherwise there has and the connection port can receive all the signal of laser
8
1
2
3
4
5
6
7
POWER ON/OFF: Power on/off
DMX IN/OUT: International standard DMX512 signal input/output
MIN MAX: Sound control
MIC: Sound receiver
ILDA DB25F IN/OUT:
Signal input connection port of the laser perform software that
in accordance with the ILDA standard.
POWER INPUT
Input power, with inner fuse.
Security key switch Laser diode ON/OFF
Remote Lock
In the event of removal, laser will not emit any beam.(E.U. IEC regulation)
ON
OFF
Security
key switch
POWER INPUT
IN - DMX - OUT
ILDA DB-25F IN
ILDA DB-25F OUT
Remote Lock
ADDRESS
ON OFF
MIC
MIN MAX
1 2 3 4
5 6 7 8 9
7
9. Control board instruction