SHOWTEC 30978, Руководство пользователя

Страница: 10 / 18

DMX address code setting:
Binary code(9 codes)
DMX address code
Algorism
Switch for DMX control mode.
The setting in the picture is DMX
signal acceptable
Function code setting:
Function
Accelerated music mode
Auto mode
Standard music mode
Switch for DMX control mode,
The setting in the picture is DMX
signal not acceptable
Algorism Binary cod (9 codes)
perform software that accord with the ILDA standard, such as LD-2000 of Pangolin
company.
In the theory, all the signal of laser perform software that accord with the ILDA
Db25 standard can control the fixture. But Pin 4 and Pin 17 not be connected in some
laser perform interfacial card. You will need to sold this two pins together at Pin25
signal output connector or connect Pin4 and Pin 17of the standard Pin 25 signal cable
before use.
Note: We have tested that Pangolin Ld2000 (Qm2000 PCI interfacial card) and
our i.Top laser (USB2.0)interfacial card) can work with this fixture well. But you
will need to make changes as above mentioned when you use Mamba Black software
( Easylaser interfacial card) of MediaLaser company.
2. Inside program mode ( include DMX )
This mode will be set by address code. The 10th code is switch code. When the
10th code is OFF, code 1-9 are function codes. When the 10th code is ON, code 1-9
are DMX address codes and the fixture will under DMX control mode.
The machine can display two different patterns at the same time--24 channel version.And
the 2nd pattern can move with the main pattern-17 channel version,Also you can display one
pattern only--14channel version. The function of each channel as following(if the channnel
not mention main pattern or the 2nd pattern, it means this channel has effect for both two
patterns. Such as channel 1,4,11,12).
10. DMX512 Operate
8