9
Cleaning frequency depends on the environment in which the fixture operates: damp, smoke or
particularly dirty surroundings can cause greater accumulation of dirt on the unit's optics. A soft cloth
and typical glass cleaning products should be used for cleaning. It is recommended to clean the
external optics at least once every 15 days
and clean the internal optics at least once every 60 / 90
days.
☆
Do not use any organic solvent, e.g. alcohol, to clean housing of the apparatus.
Trouble Shooting:
Problem
Answer
The scanning light doesn’t switch on.
Check the fuse the power socket
Replace the lamp
Although shines, but the light doesn’t
accept the instruction of the controller.
Check the digital start address and also check the
connection situation of the communication control line
The ligh only can work intermittently.
Inspect the power supply and voltage is whether normal.
Make sure the fan is working well or fans and their
filters not blocked
Defective projection
Make sure the lamp is within its life limit
Remove dust or grease from the lenses.
The beam appears dim
heck the optics is clean or the lens in good condition(not
cracked)
Replace with a new lamp of the specified type and rating.
☆
Other maintain work should by the specialist which has the experience to carry on.
Equipment and Appendix:
☆
Sniper 2R scanning Light 1pcs
☆
Power Cable 1pcs
☆
XLR connector 1unit
☆
The Product of Instruction 1pcs
Channel List:
21CH MODE
Channel
Value
Function description
Value
CH1
0---255
Pan Movement
PAN
CH2
0---255
Pan Movement Fine[16 bit]
PAN FINE[16 BIT]
CH3
0---255
Tilt Movement
TILT
CH4
0---255
Tilt Movement Fine[16 bit]
TILT FINE[16 BIT]
CH5
0---7
No Function
PAN SHAKING
8---255
Pan Shaking Movement Slow To Fast
CH6
0---7
No Function
TILT SHAKING
8---255
Tilt Shaking Movement Slow To Fast
