6
Function Set:
MENU DOWN UP ENTER
Use button switch and LCD display, can set the address code and function code easily.
Check or modify lighting function settings, Press the MENU or ENTER button. LCD display panel will
display main menus. Function operation menu all have corresponding submenu . Each menu all represent
the specific functions of lamps, specific see below "operation menu" section.
Set or browse function setting of lamp, Press UP or DOWN key.
Press ENTER key to save your changes or to ENTER submenu, Press UP or DOWN can change value(Plus
or reduce number).
Lamps starting address code calculation methods:
The current code is equal to the starting address of lamps (lamps on a starting address code) +
(number of channels lamps) Description:
1: The first fixture in the starting address of the code is A001.
2: The number of basic channel controller, should be greater than, or the total number of channels
used lamps equal.
3: Note: When using any of the controllers, each with its own lighting should be the starting address
of the code, if the first fixture in the starting address of the code is set to A001, lighting channel
number 16CH; then the first two fixture in the starting address of the code is set to A017; the third
fixture in the starting address of the code is set to A033; and so on, (this is set up according to the
different needs of the console to be)
NOTE: Turn the lamp, press MENU key to display the dmx address;
Press ENTER to display the DMX address;
Press the UP or DOWN keys to set the value you can get;
And then press ENTER to confirm, will show the latest setting next time you save power.
Press the MENU button to return to the previous menu.
Operation Menu:
The control panel menu displays for a variety of types of computer special light design, equipped
with a variety of control functions, simple control. For some models fixtures no action, the
corresponding menu option is set invalid.
According to the following chart shows the menu will understand.
LCD Display
