Showa Denki Mistresa CRG Series, Руководство по эксплуатации и меры предосторожности

Страница: 14 / 24

WARNING Fire and explosion prevention
Never allow explosive gases, organic solvents, or flames to be sucked
into the suction port.
CAUTION Operating cautions
WARNING Fire and electrical shock prevention
WARNING Maintenance and inspections prohibited
during impeller rotation
The Mistresa wiring work must be performed by a qualified electrician, and must
conform to the relevant electrical engineering standards and
internal wiring standards.
Be sure that impeller rotation has completely stopped before performing
internal maintenance and inspections.
WARNING Fire and explosion prevention
WARNING Do not install in hazardous locations
The Mistresa does not have a pressure and explosion-proof construction.
Operating the Mistresa in areas where explosive gases, etc., are present
could result in an explosion in the event of an electric motor burnout.
Never allow explosive gases , organic solvents , or flames to be sucked
into the suction port.
The CRG series is equipped with an energy-saving motor which reduces energy
loss (as compared to the standard IE1 or equivalent motor), thereby lowering the
motor's resistance. Because this may increase the starting current depending on
the product being used, it may be necessary to change the breaker, etc., when a
product which has a standard Showa Denki motor is replaced with
a CRG series product.
− 12 −