- 3 -
清 浄 空 気
パ ル ス
タ イ マ ー
ヘ ッ ダ ー タ ン ク
コ ン プ レ ッ サ ー
電 磁 弁
送 風 機
電 動 機
含 じ ん 空 気 入 口
ブ ロ ー チ ュ ー ブ
ろ 布
注）本図は動作説明用であり製品とは構造が異なります
引 き 出 し
Chapter 2 Outline of the dust collector
Configuration
The dust-containing air sucked from the inlet, primarily separated into dust and air, are sent to the filter cloth.
The air is filtrated by the outer surface of filter cloth and exhausted via blower into the atmosphere as pure air.
The dust deposited on the outer surface of filter cloth is shaken off by back-washing power produced by
compressed air, which is momentarily blown from the blow tube mounted on the upper part of the perforated
plate, against the inner surface of filter cloth. Each filter cloth in each filter line is thus cleaned automatically.
The shaken-off dust, together with the primarily separated dust, is collected in the drawer.
Pure air
Motor
Blower
Blow tube
Dust-containing
air inlet
Compressor
Header tank
Pulse
timer
Solenoid valve
Filter cloth
Drawer
Note:
The above sketch is only for operational information which
differs from the product’s configuration.
