Show Tec 41280, Руководство пользователя

Страница: 19 / 32

18
Ordercode: 41280
Candela Pix 50
6.3. PWM Frequency
In this menu you can choose several PWM frequencies.
01)
Press the UP/DOWN buttons until the display shows PWM Frequency.
02) Press the SET button to open the menu, the display will show:
03) Press the UP/DOWN buttons to select one of the 4 options.
04) Press the SET button to confirm your choice.
6.4. DMX Fail
In this menu you can adjust the behaviour of the device in case of a DMX signal error.
01)
Press the UP/DOWN buttons until the display shows Dmx Fail.
02) Press the SET button to open the menu, the display will show:
03) Press the UP/DOWN buttons to choose one of the 4 options.
04) If you choose Off, the output will blackout when a DMX signal error occurs.
05) If you choose Hold, the device will fall back on the last properly working DMX signal from before the
DMX signal error, which ensures undisrupted performance.
06) If you choose Manual, the device will fall back on the last setting in the Manual mode before the
DMX signal error.
07) If you choose Program, the device will fall back on the last setting in the Program mode before the
DMX signal error.
08) Press the SET button to confirm your choice.
6.5. DMX Sync
In this menu you can set the DMX synchronisation of the device.
01)
Press the UP/DOWN buttons until the display shows Dmx Sync.
02) Press the SET button to open the menu, the display will show:
03) Press the UP/DOWN buttons to select On or Off.
04) The Sync option is a tool which helps to keep multiple fixtures synchronized, when using them in
master slave mode.
05) If you choose On, the synchronization function is activated, this is recommended.
06) If you choose Off, the synchronization function is not activated.
07) Press the SET button to confirm your choice.