Show Tec 41280, Руководство пользователя

Страница: 11 / 32

10
Ordercode: 41280
Candela Pix 50
Multiple Candela Pixs (DMX512 Mode)
01)
Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Use a 3-p XLR cable to connect the Candela Pixs and other devices.
04)
Link the units as shown in Fig. 05, Connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second and third units.
05) Supply electric power: Plug electric mains power cords into each unit's PowerCON True 1 socket,
then plug the other end of the mains power cord into proper electric power supply sockets, starting
with the first unit. Do not supply power before the whole system is set up and connected properly.
Multiple
Candela Pixs DMX Set Up
Fig. 05
Note: Link all cables before connecting electric power!