ShoreTel VPN Concentrator 4500, Руководство по установке и настройке

Страница: 37 / 46

Chapter 3: Configuration
VPN Concentrator Installation and Configuration Guide 31
3.3.2.2 Manual configuration
#VpnPort- Port to use when contacting the VPN Gateway. Sources are MAN, CFG.
Default is 443.
VpnPort 443
#VpnEnable- Enable VPN Client if set to 1. Sources are MAN, CFG. Default is 0
#VpnUserPrompt- Don’t cache the authentication user in NVRAM for survival
across reboots if set to 1.
# This will force user entry after all power on events, but will permit automatic res-
toration of
# dropped links without user intervention. Sources are MAN, CFG. Default is 0.
VpnUserPrompt 0
#VpnPwPrompt- Don’t cache the authentication password in NVRAM for survival
across reboots if set to 1.
# This will force password entry after all power on events, but will permit auto-
matic restoration of
# dropped links without user intervention. Sources are MAN, CFG. Default is 0.
VpnPwPrompt 0
#TcpKeepAlive-Number of seconds between TCP KeepAlive transmissions. The
number maybe adjusted from 10 to 3600 seconds. Sources are CFG. Default is 60
seconds.
TcpKeepAlive 70
Step 1: With the phone on hook, press the Mute button. The LED should not
light and you shouldn't hear any tones; if this isn't the case, lift and
replace the handset.
Step 2: Dial S-E-T-U-P on the keypad and then press the # key. When
prompted, enter the assigned password for the telephone followed
by the # key.
Step 3: Press the # key to skip clearing all configuration values
Step 4: Press the # key to cycle through the configuration values until
prompted to enter the VPN Gateway parameter