manualshive.com logo in svg

SHOR-LINE KAT & PUPPY PORTALS, Инструкция по сборке

Поделиться
Скачать
SHOR-LINE KAT & PUPPY PORTALS Скачать руководство пользователя страница 5

2

Shor-Line.com

Safety Warnings Included In This Guide

READ THIS GUIDE COMPLETELY BEFORE INSTALLATION AND USE AND 
THOROUGHLY UNDERSTAND AND FOLLOW ALL SAFETY INSTRUCTIONS.

DO NOT use a plasma cutter to cut the Portal hole. Plasma cutters can create excessive 

heat that can result in severe burns or fire which will cause SERIOUS PERSONAL 

INJURY OR DEATH.

PRIOR TO DRILLING OR CUTTING A CAGE PANEL, ALWAYS INSPECT the space 
between the cage panels to be sure there are no electrical wires or other obstructions 
present. Cutting into live wires or other obstructions can result in electrical shock 
which will cause SERIOUS PERSONAL INJURY OR DEATH or property damage.

Installation of the Portal MUST BE COMPLETED BY A QUALIFIED INSTALLER familiar 

with sheet metal manipulation/modifications. Cutting or drilling into metal cages can 

produce sharp or jagged edges which could cause serious lacerations which, if not 
avoided, could result in SERIOUS INJURY OR DEATH.

Stay clear of and DO NOT TOUCH exposed cut steel. Cutting or drilling into metal cages 
can produce sharp or jagged edges which could cause serious lacerations which, if not 
avoided, could result in SERIOUS INJURY OR DEATH.

Stainless steel cages are heavy. Enlist help and USE SAFE LIFTING PRACTICES when 
removing any cages from or placing cages back into the cage bank to avoid risk of 
SERIOUS INJURY OR DEATH.

WEAR PERSONAL PROTECTIVE EQUIPMENT, such as, but not limited to, eye 
protection, ear protection, and gloves during installation. Failure to do so could result 
in SERIOUS INJURY OR DEATH.

This product is intended to be used for animals only. Do not use for anything other than 
the intended purpose.

Be sure to secure long hair or loose fitting clothing during installation. Long hair or 

loose fitting clothing can become ensnared on exposed (cut) stainless steel edges and 

cutting tools, and if not avoided, could result in minor or moderate injury.

Keep hands clear of possible pinch areas when moving parts, which if not avoided, 
could result in minor to moderate injury.

SHOR-LINE is not responsible for replacing mis-cut or damaged cages. 

During cleaning and maintenance, DO NOT pull the Portal Door away from the cage 
wall. Injury or damage to property could occur.

SAFETY

Содержание KAT & PUPPY PORTALS

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды