7
Cage Door Removal
Door hinges may vary depending on the release model of the cages. Type III cages
are used for this procedure. Contact SHOR-LINE for door removal procedures for older
model cages.
STEP 1:
Ensure both proposed cages are cleared of animals, bedding, and are
thoroughly clean.
STEP 2:
Remove the door from the Cage.
A:
Unlatch and swing door to the open position (90 degrees). See FIGURE 2.2
Keep hands clear of possible pinch areas when moving parts, which if not avoided,
could result in minor to moderate injury.
B:
Lift the door upward and slide the door from the hinges. Set away from the work
area. See FIGURE 2.3
STEP 3:
Repeat the door removal steps for each Cage to be fitted with a Portal.
FIGURE 2.3 - Cage Door Removal
FIGURE 2.2 - Cage Door Removal
SECTION TWO
