10
(5) Battery Indicator Gauge
: Located at the top of your console. When your scooter is
switched on the bar on the gauge will move across the scale from the left towards the
right, indicating fully charged batteries. As the power is used up in your batteries the red
bars will move towards the left indicating the state of charge at the precise time. When
the red bars are completely over to the right, the batteries are fully charged. When the red
bars start to disappear, your batteries are losing power. It is wise to recharge your
batteries when the two red bars remain.
(See Batteries and Battery Charging section
of this manual)
(4) Speed Adjustment Dial
: This allows you to pre-select your desired speed. The dial is
proportional to speed, and can be set anywhere between 1 and 10 increments. Turn the
dial knob counter-clockwise to "minimum" to decrease speed, and clockwise towards
"maximum" to increase your speed.
NOTE:
When attempting to climb slopes, you will need to set the dial to "high" setting.
Remember the higher the number you set your speed dial to, the faster your scooter will
travel.
(5) Horn
: located between the thumb lever controls. Press the yellow button to activate
the horn, release when no longer needed.
(6) Thumb Lever Control
: located on the right and left side of the tiller, your speed for
forward and reverse motion is controlled here. The right thumb lever moves your scooter
in a forward motion, and also controls the rate of speed by the proportional amount of
pressure applied.
The left thumb lever moves the scooter in a reverse motion and controls the rate of speed
by the amount of pressure applied. Releasing the lever will return itself to the neutral
position, and you will stop gently.
CAUTION: If you are not an accomplished outdoors powered vehicle driver, we
strongly recommend that you first practice in an open, safe area, free from traffic,
preferably with a companion who can assist you.
Содержание GK10
Страница 1: ...GK10 Instruction Manual ...
