2D_Shop camera . English manual
6
Figure 7 : POEswitch passive
When booting up, a multicolor led blinks on the camera, and after boot up it will extinguish.
Cabling
This a reminder only.
Cat 5 or Cat6 Ethernet cable is necessary, with proper A or B cabling as shown in the next figure.
Telephone cable will not work properly even on short distances.
Figure 8 normalized cabling A or B
Pulse system compatibility
It happens that on some site no Ethernet cable is available.
Ethernet connector is used for initial tuning.
The green connector carries 4 signals
Ground , 0V
Positive voltage
