must stop to use the vehicle if the tire is pierced, disassemble the tire and check it carefully.
Tire maintenance should be done by an authorized technician. Tire should be replaced
immediately when it is distorted or damaged.
Tire replacement
It is important to use the correct size and standard tire as per our specification (see details in
technical specification sheet)
Don’t use the used tire if you are not sure its previous service condition.
Tire aging
Tire aging is unavoidable even the tire is not used.
Tire aging is mainly reflected in the cracked
section on side of tire and tire tread, sometimes the tire is distorted as well. The used and aged
tire should be checked and confirmed if it is ok to use again by an authorized technician
TECHNICAL SPECIFICATION SHEET
Engine type
single cylinder, 2 stroke, forced air cooling
Power output
1.6kw/7500rpm
Max torque
2.0 N.m/3600rpm
Displacement (ml)
44
Fuel
Petrol mixed with 4% 2-stroke engine oil
Compression Ratio
7.5 : 1
Transmission
automatic with centrifugal clutch
Start method
manual pull start
Max.speed (km/h)
40
Front suspension
Telescopic fork
Rear suspension
mono shock absorber
Tyre
front & rear 2.50-10 with 4.00 P.s.i operation pressure
and 36 P.s.i Max. inflate
Brake system
front and rear disc brake with mechanical control
Fuel tank capacity
1.6L
Dry Weight (KG)
24
Dimension (mm)
1240x570x780
Seat height (mm)
580
Carton size (mm)
1045×320×550
SAFETY REMINDERS
PRE-RIDE CHECKLIST
Loose Parts
Check and secure all fasteners before every ride. Make sure steering stem clamp bolts are
locked properly in place. There should not be any unusual rattles or sounds from loose parts or
broken components. If you are not sure, ask an experienced mechanic to check.
Brake
