![ShopBot PRS Скачать руководство пользователя страница 17](http://html.mh-extra.com/html/shopbot/prs/prs_assembly-manual_1259422017.webp)
pg.
17
Slide the first cross-support into position
Add the middle legs (This step is not needed if you are setting up a 48x48 or
60x48 table)
For the middle legs you will need to repeat some of the previous steps. First you will need to add a second upper
support. However,
this support needs to be installed facing the opposite direction of the first one.
The middle leg
will be “sandwiched” between two upper supports so keep that in mind during installation.
Next, add another cross-support. Reference the spacing from the middle leg according to your table drawing.
Complete the middle leg installation by attaching the lower support to either side of the middle leg pair.
Attach two 5/16”
hardware assemblies
( 5/16”
hex bolt, lock washer, flat washer, and T-nut)
to
each end of a cross-support beam.
Then slide the T-nuts into the bottom channels
of the table sides and slide the cross supports
into position.
For proper spacing of the cross supports, please
reference the table drawing in the back of this
manual (spacing will be different for each
model).
Remember, don’t fully tighten any of the
cross-supports yet.
Assemble Your Shopbot PRS Gantry Tool 2015 02 27.Docx
© 2015 ShopBot Tools, Inc.