ShopBot Invision Enclosure, Инструкция по сборке и использованию

Страница: 6 / 27

Enclosure Top Frame Assembly
These are the parts that you will need for this
section.
15
L
(005983) x24
X
(005987) x1
T
(005986)
x10
I
(005988) x1
30.5” (005978) x7
19.5” (005979) x15
12.5” (005980) x5
#14 x ¾ Truss Head
(006109) x200
Interlock Sensor Assm
(006115) x1
16
Callouts go here
Callouts go here
This section of the assembly instructions will
guide you through the construction of the top of
the enclosure.
17
Callouts go here
Callouts go here
The top of the enclosure is constructed of 9x
19.5” sticks and 3x 12.5” sticks. Lay them out in
an open space according to the arrangement
shown in the diagram below.