ShopBot Invision Enclosure, Инструкция по сборке и использованию

Страница: 7 / 27

18
Callouts go here
Callouts go here
Insert an X Joint into the center of the enclosure
top and fasten in place using the #14 x ¾ Truss
Head Screws.
19
Callouts go here
Callouts go here
Insert 4x T Joints around the perimeter of the
enclosure top and fasten in place.
20
Callouts go here
Callouts go here
Insert 4x L Joints on the corners of the
Enclosure Top and fasten in place.
21
Callouts go here
Callouts go here
For the next section, you’ll want to flip your
assembly over to provide easier access to the
area you’ll be working on.