Shop-Vac Series B150, Руководство пользователя

Страница: 8 / 32

TROUBLESHOOTING
ONE YEAR INDUSTRIAL/COMMERCIAL WARRANTY
One year limited warranty
Shop-Vac
®
Corporation warrants the vacuum cleaner contained in this package for one year from the
date of purchase to correct by repair or parts replacement without charge any product defect due to faulty
material or workmanship. Should this product be used for rental service, a 90 day limited warranty will
apply. THIS WARRANTY DOES NOT COVER ACCESSORIES. Shop-Vac
®
assumes no responsibility for damage
or faulty performance caused by misuse or careless handling, or where repairs or modifications have been
made or attempted by others. Proof of purchase date is required. This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state or province to province.
Customers in the United States:
for product service contact Shop-Vac
®
Corporation Customer Service, at
(570) 326-3557 or go to www.shopvac.com/support. Visit www.shopvac.com for your vacuum’s parts list
schematic.
Customers in Canada: for product service return the complete unit, (transportation prepaid), to the
Authorized Shop-Vac® Service Centre nearest you. A complete list of Authorized Service Centres is included
with each vacuum cleaner.
PAGE 8
WARNING
–
IF ANY OF THE MOTOR HOUSING PARTS SHOULD BECOME
DETACHED OR BROKEN, ExPOSING THE MOTOR OR ANY OTHER ELECTRICAL COMPONENTS,
OPERATION SHOULD BE DISCONTINUED IMMEDIATELY TO AVOID PERSONAL INJURY OR
FURTHER DAMAGE TO THE VACUUM. REPAIRS SHOULD BE MADE BEFORE REUSING THE
VACUUM.
PROBLEM POSSIBLE CAUSES SOLUTION
Parts/accessories 1. Packed in tank 1. Check in tank
missing
Vacuum cleaner 1. No power at receptacle 1. Check for power
will not start 2. Defective switch 2. Contact Shop-Vac
®
customer service
3. Defective motor 3. Contact Shop-Vac
®
customer service
Dust discharging 1. Filter not installed/not installed 1. Properly install filter
from exhaust properly
2. Filter damaged 2. Replace filter
3. Filter clogged or dust is too fine 3. Use more efficient filter
4. Filter not functional 4. Clean or replace filter
Loss of suction 1. Loose hose connection 1. Tighten hose connection
2. Filter clogged 2. Clean or replace filter
3. Full tank 3. Empty tank
4. Hole in hose 4. Replace hose
Static shock 1. Dry environment 1. Add moisture to air (if
practical, use a console
or installed humidifier).
2. Relative humidity of air is low 2. This situation is temporary
and does not affect the use
of the vacuum cleaner.