Shop-Vac SEP SERIES, Руководство пользователя, Страница: 7 / 40

FILTER
INSTALLATION
AND CLEANING
DRY PICK UP
OPERATION
PAGE 6
ALWAYS DISCONNECT THE
PLUG FROM THE WALL OUTLET
BEFORE REMOVING THE TANK
COVER.
THE CARTRIDGE FILTER IS NOT COMPATIBLE
WHEN UTILIZING THE PUMP PICK UP
ASSEMBLY.
WARNING!
WARNING!
NOTE: Never use the vacuum for dry pick up without a
dry use filter installed on the lid cage. Using the vacuum
without a filter will cause dust to discharge from blower
port and cause damage to motor.
FIGURE 12
FIGURE 13
FIGURE 14
FIGURE 15
INSTALLING AND CLEANING THE CARTRIDGE
FILTER:
13. Insert machine hose end with locking nut into inlet
of tank. Turn locking nut to tighten. Do not over-
tighten.
15. Attach the extension wands to the ergonomic
elbow grip. Twist slightly to tighten the connection.
FIGURE 11.
16. Attach one of the cleaning accessories (depending
on your cleaning requirements) on the extension
wands. Twist slightly to tighten the connection.
FIGURE 11.
14. Attach ergonomic elbow
grip to accessory end of
hose for a more comfortable
hand grip while vacuuming.
Twist slightly to tighten to
connection.
FIGURE 11.
FIGURE 11
Questions?
U.S. Customers
call
888-822-4644
or visit
www.shopvac.com
24 hours a day.
Canadian Customers
call
905-335-9730
or visit
www.shopvac.ca
24 hours a day.
17. Plug the cord into the wall outlet. Your cleaner is
ready for use. I = ON, O = OFF
NOTE: Many more useful tools are available at your
local dealer or the Shop-Vac
®
website.
12. Replace tank cover, and apply pressure with thumb
to each latch until it snaps tightly into place. Make
certain all lid latches are clamped securely.
NOTE:
If foam sleeve is installed
on lid cage, remove before installing the cartridge filter
(
not standard with all models).
18. The cartridge filter can be used for dry pick up and
small quantities of wet pick up. Installation is the
same for both. When picking up large quantities of
water we recommend using a foam sleeve instead
of the cartridge filter. When picking up fine dust or
powders a high efficiency filter bag
(not standard
with all models)
must be used with the cartridge
filter.
NOTE: If cartridge filter has been used for wet pick
up, it must be cleaned and dried before using it for
dry pick up.
19. With the tank cover in an
upside down position, slide
the cartridge filter down
over the lid cage, pushing
until the filter seals against
the cover. FIGURE 12.
20. Place filter retainer into
the top of the cartridge
filter. FIGURE 13.
21. Hold the tank cover with
one hand, turn the handle
on the filter retainer
clockwise to tighten, lock-
ing the filter into place.
FIGURE 14.
22. To remove the filter for
cleaning, again hold the
tank cover and turn the
filter retainer counter-
clockwise to loosen and
remove. FIGURE 15.