Shop-Vac 3942010, Руководство пользователя

Страница: 6 / 36

PAGE 6
SET UP AND OPERATION
DANGER
–
This equipment incorporates parts such as switches, motors or the
like that tend to produce arcs or sparks that can cause an explosion. Do not pick up flammable,
combustible, or hot materials. Do not use around explosive liquids or vapors, as electrical devices
produce arcs or sparks which can cause a fire or explosion - do not use at filling stations or
anywhere gasoline is stored or dispensed.
1. Refer to the filter installation and maintenance section to make sure the correct
filters are installed for your cleaning operation.
2. Replace tank cover on the tank by aligning tabs with the lugs. Press down firmly
on the upper housing until tank cover snaps into place.
3. Attach hose to inlet located on side of tank. Position non-threaded end of elbow
over inlet with threaded end pointing upwards. Push elbow into inlet as firmly as
possible making sure notch on elbow lines up with tab on inlet. Turn elbow until
threaded part of elbow is pointing towards bottom of tank. Insert long machine hose end with locking-nut
into end of elbow and tighten. Do not over-tighten.
4. Attach the desired cleaning accessory onto the accessory end of the hose.
NOTE:
Many more useful tools
are available at your local dealer or the Shop-Vac
®
website.
5. Plug the cord into the wall outlet. Your cleaner is ready for use.
I = ON, O = OFF
ACCESSORIES, HOSES AND WANDS
FILTER INSTALLATION AND MAINTENANCE
FILTRATION SYSTEM
There are a variety of filters available for your vacuum. There are cage filters that install onto the underside
of the tank cover and tank filters that install into the tank. The filters are grouped into three filtration
categories. General filtration is used for large debris; such as, wood chips, nails and gravel. Medium
filtration is used for medium debris; such as, dirt, sand and sawdust. Fine filtration is used for fine debris;
such as drywall dust, cold ash and cement dust. It is important to have the correct filters installed for your
Nozzles and Accessories Wands
All Shop-Vac
®
vacuums covered in this manual come with accessories to cover wet and dry cleanup jobs.
Not all vacs include all accessories shown.
Deluxe 12" (30.48cm) Nozzle
Inserts snap-in and out.
Elbow swivels.
14" (35.56cm) ABS Plastic
Master Nozzle
Inserts lock into place by
sliding red buttons. Elbow swivels.
Lock
Lock
Floor
Brush
Insert
Double
Blade
Squeegee
Insert
Carpet
Tool
Insert
14" (35.56cm) Metal
Master Nozzle
Inserts lock into place by
sliding insert onto nozzle.
All Friction Fit Wands
Insert wand ends together
and twist to form a tight fit.
Positive Locking Wands
Insert wand ends together
until metal push button locks.
Locking Nut Wand End
Insert wand end over nozzle
and tighten nut.
Dual Surface Selector Nozzle
Levers control brush position for
various types of cleaning.
Brush Insert Shown
Carpet
Tool
Insert
Squeegee
Insert
All Friction Fit
Accessories
Insert wand end or hose
into accessory and twist to
form a tight fit.
(1.25" (3.18cm)
utility nozzle
shown)