Page of 9
5
OPERATION
Check before using
1. After the assembly is complete, move the Trigger (12) into the three different positions (see
below image). Be sure to check that the pallet truck operates in each position. Also trying
rocking the Handle from side to side to ensure it is properly aligned and secured.
下降
空档
上升
2. The Screw (9) (see Figure 4) is used for the adjustment of the truck. If the truck body drops
immediately after it is lifted, turn the Screw (9) slightly counterclockwise before trying the
truck again. If the truck body will not lower, turn the Screw (9) slightly clockwise. Then try to
operate the truck again till the truck is able to lower normally.
3. The Hex Nut (8)(see Figure 4) functions as a lock. This needs to be loosened before any
adjustments can be done. Be sure to tighten after adjustments have been completed.
WARNING:
1. Lift the Trigger up slightly when lowering the truck by controlling the Trigger to make the
truck lower slowly. Never release the Trigger quickly. Rapid descent will damage the truck
and the cargo.
2. Do not exceed the truck load capacity.
3. The center of gravity of the goods should be positioned in the middle of the two forks
– see
Figure 5.
4. Do not use with loose or unstable cargo.
5. Do not place cargo on the pallet truck body for long periods of time.
Lowering position
Neutral position
Raising position
Figure 5
