Shop fox W1831, Руководство пользователя

Страница: 27 / 36

-25-
Model W1831 (For Machines Mfd. Since 6/15)
SE
RV
IC
E
22. Install spindle washer (#51) and retaining ring (#50),
as shown in
Figure.26
.
27. Re-install housing base (#76) onto cast iron table
(#7) shown in
Figure.29
. Ensure that brown wiring
(#72) is connected to the rectifier (#69), then
re-install bottom plate (#90).
Figure.26 . Spindle washer and retaining
ring installed.
23. Install compression spring (#49), ensuring hooked
end is locked into driver gear (#54) shoulder, as
shown in Figure.27 .
24. Install bearing sleeve (#48) into compression spring
(#49).
25. Install bearing cover (#42).
Compression
Spring
Hooked End
Figure.27.
Hooked end of compression
spring locked into driver gear shoulder.
Retaining
Ring
Spindle
Washer
26. Install gear support (#66), as shown in Figure.28
.
Figure.28 . Installing gear support.
Gear Support
Figure.29 . Base and bottom re-installed.
Bottom
Plate
Cast Iron
Table
Housing
Base