Shop fox W1754H, Руководство пользователя

Страница: 68 / 89

-37-
W1754 20" Planer With Mobile Base
SE
RV
IC
E
Pulley Alignment
Proper pulley alignment (see
Figure 38
) prevents pre-
mature belt wear. The pulleys are properly aligned when
they are parallel and in the same plane as each other.
Use a straightedge on the edge of the pulleys to judge
alignment.
Should you find that the pulleys are out of alignment,
do these steps:
1.
DISCONNECT THE PLANER FROM THE POWER
SOURCE!
2.
Remove the motor and front access panels, the V-
belt cover, and loosen the belt tension (
Page 24
).
3.
Using a 14mm wrench, loosen the motor mount fas-
teners shown in
Figure 39
just enough to allow the
motor to be repositioned.
4.
Slide the motor as required to align the pulleys.
5.
Re-tighten the motor mount fasteners.
6.
Inspect V-belts for damage caused by bad pulley
alignment and replace belts as a matched set of
three if necessary.
7.
Re-tension the V-belts.
8.
Replace the V-belt cover, motor and front access
panels.
Figure 38
. Example of checking belt
alignment.
Figure 39
. Motor mount fasteners.
OFF