Shop fox W1742, Руководство по вставке

Страница: 13 / 90

-13-
Model W1742H (For Machines Mfd. Since 01/20)
M
A
INTE
N
A
N
CE
Rotating/Replacing
Cutterhead Inserts
The carbide inserts are very sharp and
can quickly cut your hands. ALWAYS
use caution and heavy leather gloves
when handling these parts to reduce
the risk of personal injury.
The helical cutterhead is equipped with indexable carbide
inserts that can be rotated to reveal any one of its four
cutting edges. If one edge of the insert becomes dull or
damaged, simply rotate it 90 ˚ to reveal a fresh cutting
edge.
To rotate or replace a helical cutterhead insert, do
these steps:
1.
DISCONNECT MACHINE FROM POWER!
2.
Remove top cover and belt cover.
3.
Rotate cutterhead pulley to provide access to
insert(s) to be rotated/replaced.
4.
Put on heavy leather gloved to protect fingers and
hands.
5.
Remove any sawdust or debris from head of insert,
Torx screw, and surrounding area (see
Figure 6
).
Items Needed Qty
Phillips Screwdriver #2 .........................................1
Torque Wrench ..................................................1
T-20 Torx Bit .....................................................1
Heavy Leather Gloves .................................... 1 Pair
Light Machine Oil ................................... As Needed
Figure 6. Insert and Torx screw location.
Torx Screw
Cutterhead
Insert
MAINTENANCE